Pneumatic angle seat valve - Angle Seat Valve Series - 浙江众源自控设备有限公司

Working principle

In the non-working state, the valve is normally closed (open) due to the action of the spring force, and the valve is opened (closed) when the actuator piston is acted on by the compressed gas. The double-acting form relies on the pressure gas to control the valve switch.

Scope of application

• Beer and beverage filling equipment

• Printing and dyeing textiles

• Gas industry

• Pharmaceutical and medical equipment

• Chemical Industry

• Autoclave

• Foaming machinery

• Water/sewage treatment

Features

• Large flow, small flow resistance, no water hammer

• Y-shaped design, increased flow by 30% and long service life

• Stem auto-correction, self-lubricating, maintenance-free

• The cylinder is made of stainless steel, which is better in harsh environments and can be rotated 360°.

Technical parameter

管道压力 Fluid pressure	Max1.6MPa (232 psi)
控制压力 Control pressure	0.3-0.8 MPa (43.5-116 psi)
控制介质 Control fluid	中性气体或空气 Neutral gas，Air
阀体材料 Body material	CF8M/CF8
气缸材料 Actuator material	PTFE
气缸尺寸 Actuator size	CF8
适用介质 Applicable fluid	水，酒精，油，燃料，蒸汽，中性气体或液体，有机溶剂，酸碱溶液 Water，Alcohol，Oil，Fuel，Steam，Neurtral gas or liquid，Organic solvent，Acid and lye
介质粘度 Fluid Viscosity	Max 600 mm²/s
介质温度 Fluid temperate	-10℃—+180℃
环境温度 Ambient temperate	-10℃—+80℃
控制形式 Control type	单作用常闭、常开，双作用常闭 Nomally closed，normally open，double acting
连接形式 Connection	螺旋式，直角螺丝式，焊接式，法兰式，直角法兰式，快装式 Threaded (BSP, BSPT, NPT), Welded, Flanged, Tir-clamp